Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
Carbon steel; sharp edges. Break in half lengthwise for use (protect fingers and use eye protection). This is the preferred cutting blade for use with the PELCO easiSlicer™. Ideally suited for use with Microslicer™, Vibratome® and other vibratory slicers. Excellent when used as is (unbroken) in McIlwain Tissue Chopper. • Length: 42.8mm (1.685") • Cutting Edge Length: 36mm (1.42") • Width: 22mm (0.865") • Thickness: 0.127mm (0.0045")
PTFE-Coated stainless steel, individually wrapped and bulk packed. Break in half lengthwise for use (protect fingers and use eye protection).Suitable blade for PELCO easiSlicer™, Microslicer™, Vibratome® and other brands of vibratory microtomes. Suitable alternative to Feather® blades when used as is (unbroken) in McIlwain Tissue Chopper. • Length: 42.9mm (1.69") • Cutting Edge Length: 37.1mm (1.46") • Width: 21.7mm (0.855") • Thickness: 0.11mm (0.004")
Sapphire, while not as hard as tungsten carbide or diamond, is still hundreds of times harder than steel razor blades. The hardness provides durability and sharpness. With proper care, one blade can accomodate a large number of sections.
Specifications
Material: synthetic single crystal sapphire Edge Length: 1.5" (40mm) Blade Height: 0.5" (12mm) Blade Thickness: 0.035" (0.9mm)
Other Blades for Vibratory Tissue Slicers - Sapphire Blades
PELCO® Pro CA44 is an instant tissue adhesive based on cyanoacrylate. Developed to glue tissue on specimen holders used in vibrating microtomes such as the PELCO easiSlicer™, Microslicer™ and Vibratome®. Although the tissue adhesive is unstable in boiling water, it is recommended to use#19920 PELCO® Pro Cyanoacrylate Debonder to remove or clean cured cyanoacrylate. Supplied in 20ml bottle with dispenser tip, closed with ptfe coated steel pin for optimum seal. Comparable to Loctite 404 tissue adhesive.
PELCO easiSlicer™ and other vibratory tissue slicing applications. Also for other quick-set tissue-slide uses. 0.33 oz. / 9.3g / 10ml I - SDS (207KB PDF)
(also see PELCO® Tissue Adhesive)
The PELCO® Pro Cyanoacrylate Debonder destabilizes and debonds cured cyanoacrylates. Useful for releasing specimens from holders, cleaning cyanoacrylates from surfaces and removing cured cyanoacylates from fingers. Works on all brands of cyanoacrylate glue (Loctite, Henkel, Permabond, 3M™, PELCO®, Aron Alpha, etc.). The debonder is also a solvent, please check before using on plastic surfaces / samples and avoid repeated skin contact. Supplied in 20ml bottle with dispenser tip.
This is a perfect tool for retrieving free floating sections from the bath. Made of glass.