Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
Crystalbond™ 509 Provides excellent adhesion and minimizes clogging of diamond tools compared to waxes. They are transparent in thin cross-sections. Soluble in acetone, odorless, non-flammable, biodegradable and may be rinsed in water. Crystalbond™ 555 & 555-HMP A low melting point adhesive for moderate stress machining processes. It is transparent in thin cross-sections and is soluble in hot water. 555 has a Flow Point of 120ºF (54ºC); 555-HMP is 150ºF (66ºC); Crystalbond™ 590 A high strength, resilient adhesive system, ideal for doing miniature and tall parts. It is soluble in methanol or IPA.
PELCO® Technical Notes, Crystalbond™ Adhesive (PDF) SDS for Crystalbond™ 509-1 and 509-3, Prod. No. 821-1 and 821-3 (192KB PDF) SDS for Crystalbond™ 555, Prod. No. 821-2 (189KB PDF) SDS for Crystalbond™ 590, Prod. No. 821-4 (182KB PDF) SDS for Crystalbond™ 555-HMP, Prod. No. 821-6 (98KB PDF)
Ideal for scribing/dicing wafers with vacuum hold down fixturing.
ion milling, cross-sectioning This is a nonconductive, two-component, solvent-thinned, epoxy-phenolic adhesive for high performance applications. Chemically resistant and provides a thin layer of glue which has good ion milling properties. It has low viscosity and is extremely thin, with minimum creep, hysteresis and linearity problems. Solids content is 22%. It is an excellent adhesive for mounting samples for TEM dimpling and bonding of samples to TEM grids for imaging or FIB.
Operating temperature range, short term is -269° to +370°C; long term, -269° to +260°C. Elongation can occur at +24°C (3%). This may be the widest temperature range general-purpose adhesive that is available. A kit contains: 4 bottles (14g each) Resin, 4 bottles (11g each) Curing Agent, 4 brush caps for dispensing mixed adhesives, 4 disposable mixing funnels and instructions.
I - 16039 Adhesive SDS (173KB PDF) I - 16039 Curing Agent SDS (167KB PDF)
The PELCO SampleBond™ Adhesive has been especially developed for sample bonding to supports. It is a thin, fast curing cyanoacrylate type adhesive which can be used as a cleaner alternative to wax for mounting samples to glass for TEM/FIB thinning procedures. Ideal for bonding metals, silicon, ceramics and other non-porous materials to similar materials or to glass. Can also be used to bond thin samples together for cross section procedures. Samples glued with PELCO SampleBond™ can be easily debonded (removed) from the support by using #19920 PELCO® Pro Cyanoacrylate Debonder. Supplied in 20ml bottle with dispenser tip, closed with PTFE coated steel pin for optimum seal.
Cyanoacrylate Brand Cross Reference and Technical Data I- 16024 SDS (180KB PDF)
Conveniently packaged kit with PELCO SampleBond™ Adhesive for sample bonding on glass supports and PELCO® Pro Cyanoacrylate Debonder (see description below) to remove the sample after thinning. Kit contains two ea. 20ml bottles with dispenser tips.
The PELCO® Pro Cyanoacrylate Debonder destabilizes and debonds cured cyanoacrylates. Useful for releasing specimens from holders, cleaning cyanoacrylates from surfaces and removing cured cyanoacylates from fingers. Works on all brands of cyanoacrylate glue (Loctite, Henkel, Permabond, 3M™, PELCO®, Aron Alpha, etc.). The debonder is also a solvent, please check before using on plastic surfaces / samples and avoid repeated skin contact. Supplied in 20ml bottle with dispenser tip.
PELCO® Cyanoacrylate Cure Accelerator provides nearly instant curing for all cyanoacrylate glues. It makes sample mounting/demounting faster and easier, drastically cutting curing times. It allows for much greater gap filling and enhances bonding of difficult to bond materials.
Has a low odor solvent base and is compatible with PELCO®Samplebond™, and all PELCO® Pro Cyanoacrylate Adhesives.
International shipping restrictions may apply.
Loctite® 460 is a fast curing thin glue which can be used as an alternative to wax for mounting samples to glass for TEM/FIB Thinning. Soluble in acetone. Sold in bottles of 0.70oz. / 20g. I - 16029 SDS (142KB PDF)