Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
Include NIST traceable certificate
Precise and easy to use digital calipers with great features from Swiss Precision Instruments. Made from precise ground hardened stainless steel with a large LCD screen. Available with 6", 8" and 12" range. Accurate to 0.0010" (0.025mm) for the 6" model and 0.0016" (0.038mm) for the 8" and 12" models. Absolute or incremental switching, zero-set anywhere within range, inch-metric conversion and auto power on/off. A NIST traceable certificate is included with each of these calipers w/o additional costs. Complete with CR2032 battery and storage case.
Designed for the lab Switch from inches to millimeters at the touch of a button. Great for use in measuring scratch or damage sensitive materials. Will not corrode when used on tissue or other wet materials. This caliper will measure up to 6" (152mm). The graduated scale on the caliper body is for approximate reference only. The exact measurement (accurate to ±0.1mm/0.01") is shown on the LCD display.
Zeroes at any point Zero button instantly sets unit to zero when jaws are at any position. This permits setting a Floating Zero™ or reference point to read “greater than or less than results with a minus sign displayed” without calculations. Ergonomic design, precision calipers are ideal for measuring outside or inside diameter. Easy to read, large digital display is 1/3" (8.5mm) high.
Traceable to NIST for accuracy No lubrication is ever required on the ultra-smooth slide bar. Runs on the supplied battery for 10,000 hours. Made of strong composite carbon fiber. To assure accuracy an individually serial-numbered Certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Example of Calibration Certificate (PDF/381KB)
Clear, easy-to-read numbers on a digital counter; every fifth millimeter (and thousandth) is numbered on the thimble. Including wrench and fitted case. NIST traceable certificate is available at time of purchase against additional cost.
Metric - 0 to 25mm, 0.001mm graduation
High precision caliper for both inch and metric measurements. Graduations 0.05mm and 0.001 inch. Hardened, tempered stainless steel, satin chrome finish. Jaws designed for inside, outside and thread measurements. Thumb lock slide. Depth of jaws: 1.6" (40.6mm). Range: 6" (152mm).