Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
Pieces Per Ounce Table
Schott D263M Glass Coverslips Technical Data
Thermanox or TMX coverslips are made of a polymer, in the polyolefin family, that is highly resistant to most chemicals. They are resistant to alcohols, aldehydes, hydrocarbons, dilute acids (<10%) and dilute alkalis (<2%). Thermanox has limited resistance to chlorinated hydrocarbons and it is not resistant to concentrated acids or bases. It is a flexible transparent polymer that can be easily sectioned by using a microtome and is able to withstand low and high temperatures (-70°C to + 150°C).
PELCO® Technical Notes, Thermanox Coverslips, #26025-26031
Correlative Microscopy Coverslips® are polyester based reticle films designed to bring together multiple disciplines of microscopic analysis using singular tissue culture sources. In this way, laboratories and research facilities can save time and money in their research endeavors. The Correlative Microscopy Coverslips® are available in three patterns for different application requirements. All are 22 x 22mm coverslips with a 0.18mm thickness. The 10 x 10 grid of 1mm squares and the 20 x 20 grid of 0.5mm squares are now available on 18mm diameter round coverslips with 0.18mm thickness. These coverslips allow the application of multiple microscopies (light, fluorescence, scanning electron microscopy - SEM, and transmission electron microscopy - TEM) originating from a specific position on a single coverslip.
PELCO® Technical Notes, Correlative Microscopy Coverslips (92KB PDF)
Quartz Microscope Slides and Cover Slips are a necessity for microscopy applications where UV transparency is needed. They can also be used for high end microscopy applications to reduce signal los due to absorption. Other application can involve UV radiation transparency. The quartz slides can also be used for high temperature applications up to 1250°C (2282°F). Above this temperature the material will start to soften. The Quartz material used to manufacturer our high quality quartz microscope slides and cover slips is the GE 124 type high purity fused quartz, a well documented quartz used over decades in microscopy applications.
Technical Iinformation about GE 124 Quartz
Transparency is provided for 0.19 to 4.2um with very low absorbance in the 0.26 to 2.6um range. Quartz Coverslips are available in several sizes and thicknesses, although for most microscopy applications the 0.25mm thickness is adequate. Not sterile.
Quartz Microscope Slides
specially made for the large microscope slides
Made from optical grade borosilicate glass. Made for large microscope slides of 4 x 3" (102 x 76mm) to 7 x 5" (178 x 127mm).
Typical Values of Coverglass (39KB PDF)
Made of optical grade borosilicate glass. Made for large microscope slides of 3 x 1-1/2" (75 x 38mm) and 3 x 2" (75.2 x 50.4mm) or larger.
This coverglass is sized to match the working area of the HISTOBOND® + Super Mega Slide.
Thickness: #1.5, #1 Dimensions: 64 x 50mm
ClariTex Super Mega Glass Microscope Slides
Simple hand actuated vacuum pump with 1/2" straight tip and 9.3mm (3/8") silicone cup to pick up coverslips, mica and Si chips.
High quality, borosilicate glass coverslips coated with 50nm of gold with a 5nm chromium adhesion layer between the coverslip surface and the gold coating. Can be used for a wide range of nanotechnology, biotechnology and AFM application. Both Cr and Au are evaporated on the glass coverslips using a vacuum evaporation system. The gold surface is not atomically flat, but has bumps in the nm range. The coverslips are sold in packs of 2 and are packed in an X0 Gel-Pak box. The gold coated coverslips are autoclavable.
Specifications: Glass coverslips size: Ø16mm with thickness #1 (0.13-0.16mm) or 22x22mm with thickness #2 (0.19-0.25mm) Glass type: Schott D263M borosilicate Chromium adhesion layer thickness: 5nm Gold substrate layer thickness: 50nm (±5nm) Gold purity: 99.999%
PELCO® Pro Gold Plated Tweezers
*Note: Not all sizes listed are available