There is a wide selection of original Omniprobe probe tips available for the different generations of Omniprobe AutoProbe™ systems:
Tip with Ni Shank for AutoProbe™ 100 & 200
|
 |
|
Custom probe tip design for the AutoProbe™ 100 & 200 systems. Nickel tube
shank with a diameter of 0.508mm (0.020") and a tungsten tip with a diameter of
76µm (0.003"). Tip radius is 0.5µm with a 13° taper angle for maximum lifetime.
Nickel shank ~33.25mm (1.31") long. Tungsten tip ~35.5mm (1.40") with the tungsten whisker
starting at 2.3mm (0.090") from the tip.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-101
| Tip with Ni shank for the Omniprobe AutoProbe™ 100 & 200
| pkg/10
| $481.70
|
|
|
Standard W Probe Tips for AutoProbe™ 100 & 200
|
 |
|
Custom probe tips for the AutoProbe™ 100 and 200 systems. All Tungsten design with a tip
radius of 0.5µm and a 10-13° taper angle for maximum life time.
Shank diameter is 0.508mm (0.020").
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-102
| Standard W Tip for the Omniprobe AutoProbe™ 100 & 200
| pkg/10
| $196.60
|
|
|
Narrow W Probe Tips for AutoProbe™ 100 & 200
|
|
|
Custom narrow probe tips for the AutoProbe™ 100 and 200 systems. All Tungsten design with a sharper tip
radius of <0.5µm and a 8-10° taper angle.
Shank diameter is 0.508mm (0.020").
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-106
| Narrow W Tip for the Omniprobe AutoProbe™ 100 & 200
| pkg/10
| $370.00
|
|
|
Probe Tips for in situ Tip Exchange for AutoProbe™ 300 & 400
|
 |
|
Custom probe tips for the AutoProbe™ 300 system for in situ probe tip exchange systems.
Tungsten tip with stainless steel shank, tip radius is 0.5µm with an 8-10° taper angle.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-103
| in situ probe tips for the Omniprobe AutoProbe™ 300 & 400
| pkg/20
| $1264.00
|
|
|
Keyed Probe Tips for the AutoProbe™ 300 & 400
|
 |
|
Custom keyed probe tips with a flat on the collar for secure positioning in the Omniprobe AutoProbe™
300/400 probe tip holder.
Tungsten tip with stainless steel shank, flat on collar, tip radius is 0.5µm with an 8-10° taper angle.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-107
| Keyed Probe tips for the Omniprobe AutoProbe™ 300 & 400
| pkg/20
| $391.80
|
|
|
AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port
|
 |
|
Custom probe tips for the Omniprobe AutoProbe™ 300/400 systems with a reduced collar diameter to
accomodate the 50 elevation angle on the FEI Helios front port systems.
Tungsten tip with stainless steel shank, smaller collar, tip radius is 0.5µm with an 8-10° taper angle.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-108
| Omniprobe AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port
| pkg/20
| $821.00
|
|
|
Keyed AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port
|
 |
|
Custom keyed probe tips for the Omniprobe AutoProbe™ 300/400 systems with a flat on the reduced collar diameter to
accomodate the 50 elevation angle on the FEI Helios front port systems.
Tungsten tip with stainless steel shank, flat on smaller collar, tip radius is 0.5µm with an 8-10° taper angle.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-109
| Keyed Omniprobe AutoProbe™ 300 & 400 Probe Tips for the FEI Helios Front Port
| pkg/20
| $405.02
|
|
|
Tips for AutoProbe™ 250 & 200 Equipped with Short-Cut-Box
|
|
|
|
Custom probe tips for the AutoProbe™ 250 & 200 systems. Compatible with short-cut. All-tungsten design with a 0.508mm (0.020")
shank diameter. The tip radius better than 0.5µm with a taper of 6° taper angle for greater
precision.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-105
| W tips for the Omniprobe AutoProbe™ 250 & 200 with Short-Cut
| pkg/10
| $297.00
|
|
|
|
The Omniprobe® Lift-Out Grids are specifically designed to accept the
TEM lamellas milled out by FIB or SEM/FIB systems. Typical thickness of the grids is
25-30µm with a diameter of 3mm. The posts are designed for optimum access and
provide a secure area for attaching (welding) the lamella(s). The Omniprobe® grids fit
standard TEM holders and provide a non-obscured view of the thin sections attached to the posts.
Available in standard Cu with 3, 4 and 5 posts and in Mo with 3 posts. All Lift-Out Grids have multiple indexed mounting positions for easy identification and positioning in the TEM.
Also the PELCO® FIB Liftout Grids are available.
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-203
| Omniprobe® Lift-Out Grids, Cu with 3 posts
| pkg/100
| $298.10
|
|
| 460-2033
| Omniprobe® Lift-Out Grids, Cu with 3 posts, shallow downset
| pkg/100
| 204.95
|
|
| 460-223
| Omniprobe® Lift-Out Grids, Mo with 3 posts
| pkg/25
| 429.30
|
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-2031-S
| Omniprobe® Lift-Out Grids, Cu with 3 posts and side access
| pkg/100
| $204.00
|
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-204
| Omniprobe® Lift-Out Grids, Cu with 4 posts
| pkg/100
| $298.25
|
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-205
| Omniprobe® Lift-Out Grids, Cu with 5 posts
| pkg/100
| $326.85
|
|
|
|
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-206
| Omniprobe® Beryllium Half Ring Grids, Be
| pkg/10
| $686.50
|
|
|
|
PELCO® FIB Grid Box for Lift-Out Grids or Half Grids
Four position grid box with lid for holding FIB lift-out grids or half grids.
The PELCO® FIB Grid Box cavity depth is only 1.7mm, thus preventing the
grids from rotating in the diamond shaped cavity. The FIB grids can be relatively easily
loaded/unloaded using sharp tweezers.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 160-54
| 4 Position PELCO® FIB Grid Box with Lid
| each
| $10.85
|
|
|
Auto-Probe™ Accessories
A number of accessories are available for assisting in FIB milled TEM lamella lift-out
procedures.
|
460-316 Low Profile Double
|
Low Profile Double TEM Grid Holder
The Low Profile Double TEM Grid Holder holds two lift-out grids and has a spring-loaded jaw for easy
unloading. This holder has a short standard pin style post base: ø3.2 x 4mm length
(1/8" x 0.15") to accommodate thinner-type stage plates used in full wafer systems.
Made of aluminum and all non-magnetic materials.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-316
| Low Profile Double TEM Grid Holder, Al
| each
| $1137.50
|
|
|
460-318 Low Profile Double TEM
Grid and Sample Holder, Al
|
Low Profile Double TEM Grid and Sample Holder
TEM grid and sample holder for FIB and SEM/FIB (DualBeam™ and CrossBeam®)
systems with stations for 2 TEM lift-out grids and 2 sample mounts. This holder has
a standard pin style post base: ø3.2 x 8.1mm length (1/8" x 0.32")
compatible with most standard pin stub holders. Made of aluminum jaws and non-magnetic materials.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-318
| Low Profile Double TEM Grid and Sample Holder, Al
| each
| $2055.00
|
|
|
460-319 Low Profile Double TEM
Grid and Single Sample Holder, Al
|
Low Profile Single Sample and Grid Holder
Single sample and TEM grid holder for FIB and SEM/FIB systems with stations for two
TEM lift-out grids and one sample mount. This holder has a standard pin style post
base: 3.2 x 8.1mm (1/8" x 0.32") compatible with most standard pin stub
holders. Made of aluminum and non-magnetic materials.
| Prod #
| Description
| Unit
| Price
| Order / Quote
|
| 460-319
| Low Profile Double TEM Grid and Single Sample Holder, Al
| each
| $1376.50
|
|
|