Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
This extensive selection of multi-functional EBSD and t-EBSD specimen holders can be used in SEMs, FESEMs and FIB systems with a standard pin or M4 stage mount. With the pre-tilted holders, there is no need to tilt the specimen stage. This avoids drift and enables quick setup for EBSD analysis. The 70° pre-tilt assemblies include petrographic slide holders and metallographic sample holders. Some of the larger holders require a larger specimen chamber and a larger stage. Depending on the available working distance, z-movement, and maximum specimen height provided by the specimen stage in the SEM, stub extensions and stage adapters may be added to obtain the optimized working distance.
EBSD holders with M4 threaded hole can be attached to an SEM stage (Hitachi, JEOL, Amray, etc.) by using interchangeble holders and adapters:
EBSD holders with M4 threaded hole can be used as a pin mount holder by using an M4 to pin mount adapter:
70° pre-tilt EBSD holder has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.
PELCO SEMClipTM Ø12.5mm (1/2"), Single Clip mount. An easy, quick and clean way to mount any type of thin specimen. Allen wrench included.
FIB grid holder mounted on a standard 70° pre-tilt holder. Holds up to 2 FIB grids of the same thickness. Holder is fully adjustable, rotatable through 360°.
Has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
70º pre-tilt holder with removable 3.2mm (1/8") pin to allow M4 mounting. Machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.
Single stainless steel set screw into an open slot that is 4mm (0.157") wide x 5mm (0.197") deep. Ø12.7mm (1/2") x 17.7mm (0.70") high. Allen wrench included.
70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Holder is fully adjustable, rotatable through 360°.
Screws used are M3 x 3mm set, stainless steel, clip screw is M2 x 3mm pan head, brass, 3.2mm (1/8”) pin.
70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Fully adjustable, rotatable through 360°.
Screws used are M3 x 3mm set, stainless steel, M4 x 8mm stainless steel socket head cap screw, clip screw is M2 x 3mm pan head, brass, M4 threaded hole.
70° EBSD Pre-Tilt Holder accepts standard 12.7mm (1/2") pin stubs with 3.2mm (1/8") pin. Grooved, made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
70° and 20° EBSD Pre-Tilt Holder accepts standard pin stubs. Holder is machined from aluminum with pin 7.9mm (5/16") long and standard 3.2mm (1/8") diameter. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
70° and 20° EBSD Pre-Tilt Holder accepts standard pin stubs. Holder is machined from aluminum with M4 threaded base. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
70° pre-tilt EBSD holder for standard 25mm (1") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.
70° pre-tilt EBSD holder for standard 32mm (1-1/4") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.
70° pre-tilt EBSD holder for standard 38-40mm (1-1/2") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.
70° pre-tilt EBSD holder for standard 38-40mm (1-1/2") embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. M4 compatible thread in base. This holder is made of vacuum grade aluminum with stainless steel Allen set screws. Allen wrench included.
EBSD pre-tilt holder including TEM/FIB Grid Holder that can be positioned at 70° or 20°. Pre-Tilt holder is machined from aluminum with pin 7.9mm (5/16") long and standard 3.2mm (1/8") diameter. Grid holder is made of machined aluminum with clip made of a phosphor bronze alloy and brass screw. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
EBSD pre-tilt holder including TEM/FIB Grid holder that can be positioned at 70° or 20°. Pre-Tilt holder is machined from aluminum with M4 threaded base. Grid holder is made of machined aluminum with clip made of a phosphor bronze alloy and brass screw. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
TEM or FIB lift-out grid holder on pin for transmission EBSD. Length of overall holder is 22.1mm (0.87") and 4.6mm (0.18") in width. Pin is 3.2mm (0.12") diameter and 7.9mm (0.31") in length, with flat. Holder is made of machined aluminum, the clip is made of a phosphor bronze alloy, and the screw is brass.
Replacement clips and screws for t-EBSD holders. Clips are made of a phosphor bronze alloy. Thickness of clip is 0.254 mm (0.010"), overall length is 10.77mm (0.424"), and width is 3.99mm (0.157"). Replacement M2 screws are made of brass and are 3mm in length.