Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
15363-1
15363-3
Pin mount adapters, 15 x 10mm H and 12.2 x 10mm with M4 thread on one side. Enables the use of standard pin mount with 1/8" (3.2mm) pin on Hitachi or ISI/ABT/Topcon SEMs. Made from aluminum with stainless set screw. Allen wrench included. Note: when these adapters are mounted on the Hitachi stag,e 6mm height is left, this will result in any mounts with pin lenght longer than 6mm having part of the pin mount sticking out of the adapter.
The pin mount adapters to M4, with standard 3.2mm (1/8") hole in the top and M4 thread in the base are available in 4 sizes:
They enable the use of standard pin mounts with 3.2mm (1/8") pin on Hitachi M4 thread. Longer adapters are used for short working distances without raising the specimen stage. Made from vacuum grade aluminum with stainless steel set screw. Allen wrench included. When combined with the pin mount adapters (#15319, #15319-9 or #15319-2) these pin to M4 adapters can also be used as height extenders for pin mount style stage used on FEI/Philips, ZEISS/LEO, Cambridge, Leica, Tescan, CamScan and Amray SEMs. They can even be stacked to make them higher.
12.5mm (1/2") high, pin stub extender allows bringing pin stubs and pin stub sample holders closer to the pole piece without moving the SEM sample stage. Multiple extenders are stackable. Compatible with all standard 3.2mm (1/8") pin stubs or pin stub SEM holders with maximum pin length of 10mm (0.4"). Made of vacuum grade aluminum with stainless steel allen set screw. Allen key included
15362
Pin mount adapter, 9.5 x 9.5mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.
Pin mount adapter, 12.2 x 10mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.
Pin mount adapter, 15 x 10mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.
Pin mount adapter, Ø25 x 10mm H for JEOL. Enables the use of standard pin mounts with 1/8" (3.2mm) pin on JEOL SEMs (including JEOL NEOSCOPE). Made from aluminum with stainless set screw. Allen wrench included.
Pin mount adapter, Ø32 x 10mm H for JEOL. Enables the use of standard pin mounts with 1/8" (3.2mm) pin on JEOL SEMs (including JEOL NEOSCOPE). Made from aluminum with stainless set screw. Allen wrench included.
Hitachi M4 adapter to standard 1/8" (3.2mm) pin stub. Enables the use of Hitachi mounts and specimen holders with M4 thread on SEMs with pin mount holder (FEI/Philips, ZEISS/LEO, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Suitable for larger specimen holders. Pin length 3/8", table diameter 5/8" (15.9mm). Made from Aluminum with stainless steel screw.
Hitachi M4 adapter to standard 1/8" (3.2mm) pin stub. Enables the use of Hitachi mounts and specimen holders with M4 thread on ZEISS/LEO SEMs and SEM/FIB systems. Suitable for larger specimen holders. Pin length 6mm, table diameter 5/8" (15.9mm). Made from Aluminum with stainless steel screw.
Hitachi M4 adapter to standard 9.5mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø9.5 x 9.5mm. Made from aluminum with stainless steel screw.
Hitachi M4 adapter to standard 12.2mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø12.2 x 10mm. Made from aluminum with stainless steel screw.
Hitachi M4 adapter to standard 15mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø15 x 10mm. Made from aluminum with stainless steel screw.
Hitachi M4 adapter to standard 25mm JEOL cylinder mount. Enables the use of Hitachi 15 and 25mm mounts with M4 thread on JEOL SEMs (including JEOL NEOSCOPE). Cylinder mount Ø25 x 5mm. Made from aluminum with stainless steel screw.
Hitachi M4 adapter to standard 32mm JEOL cylinder mount. Enables the use of Hitachi 15, 25 and 32mm mounts with M4 thread on JEOL SEMs (including JEOL NEOSCOPE). Cylinder mount Ø32 x 6mm. Made from aluminum with stainless steel screw.
Low profile pin with standard 1/8" (3.2mm) diameter with 3/8" (9.5mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into a pin stub style mount (FEI/Philips, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Can also be used to adapt Hitachi specimen holders with M4 thread to pin stub mounts which are used on many SEM platforms. Made from aluminum.
Low profile pin with standard 1/8" (3.2mm) diameter with 1/4" (6mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into a ZEISS pin stub style mount. Made from aluminum.
Long profile pin with standard 1/8" (3.2mm) diameter with 5/8" (14.75mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into an Amray pin stub style mount. Made from aluminum.
Small cylinder to pin mount adapter stubs. Enables the use of Ø9.5 and Ø12.2mm JEOL or Ø15mm ISI cylinder mounts on pin mount holder (FEI/Philips, ZEISS/LEO, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Pin length 3/8" Material: machined aluminum with stainless steel Allen screws of 5 and 8mm, Allen wrench included.
Note: Top Image shows S-4 mount left of the adapter, bottom: S-4 mount inserted into adapter.
This pin mount adapter enables the use of standard 1/8" (3.2mm) pin mounts directly on a T-base stage adapter used in Hitachi S-4000, S-4200, S-4300, S-4500, S-4700 and S-3600N SEMs. Made from aluminum with stainless steel set screw. Allen wrench included.
Fits JEOL SEM: 6510/6390/6380/6360/6010/5700/5600/5500/5410/5400/5300/T330/T220/T300/T200/TT100/T20
Aluminum dovetail stage adapter for using standard 3.2mm (1/8") pin mounts with the JEOL SEM's listed above.
Fits JEOL SEM: 5800/5900/5910/6460/6480/6490/6610
Fits JEOL SEM: 7800F/7601F/7600F/7500F/7100F/7000F/6700F/6500F/IT200/IT300/IT500/IT500HR/IT510/IT700HR/IT800
Solid brass dovetail stage adapter for using standard 3.2mm (1/8") pin mounts with the JEOL SEM's listed above. Can hold up to 5 standard 12.7mm (1/2") pin stubs or one larger pin stub.