Your Secure Session, is about to expire in seconds.
For more information, please read our Privacy Policy.
An efficient way to warm embedding plastics while removing gas bubbles. The aluminum base is placed on a laboratory heating plate (optional). A vacuum can be drawn through a provided porthole in the baseplate using an optional vacuum pump. A digital thermometer (included) measures the plate temperature. Can be used up to 120°C (248°F). Bell jar made out of soda lime glass, Silicone o-ring seal. Vacuum gauge (showing inches of mercury), 3-way valve with filtered vent with a 1/2" Hose Connection (standard) to connect vacuum systems with a 1/2" ID vacuum hose. A 3/8" Hose Connection is also included for 3/8" or 1/4" ID hose. What a practical and effective way to cure embedments or dry samples while degassing them! Inside dimensions are 6" Dia. x 3" H (15.3 x 7.6cm)
Vacuum Pump Kits for #2245 Vacuum Desiccator P40-H Hot Plate
This pumping kit consist of the VRI-2 pump with a KF16 hose adapter, 1/4" thick wall silicone hose and rotary pump exhaust filter and KF16 adapter. The achievable vacuum is in the 10-2 mbar range. Very cost effective solution offering fast pumping speed and good end vacuum. Ideally used for intermittent pumping. Available both in 115V and 230V.
891-31 - SDS (PDF 93KB)